New Horizons Inspections, LLC
← Home Tips

10 Easy Ways to Save Money & Energy in Your Home

· New Horizons Inspections, LLC

Many people are unaware of how easy it is to make their homes run on less energy. Here at New Horizons Inspections, we aim to change that.

Drastic reductions in heating, cooling, and electricity costs can be achieved through simple changes that many homeowners can make themselves.

Why make your home more energy-efficient? Here are a few good reasons:

It saves you money. It costs less to power a home that has been updated to be more energy-efficient.

It increases the comfort level indoors.

It reduces pollution. Conventional power production introduces pollutants that can contaminate the air, soil, and water supplies.

It reduces our impact on climate change.

Federal, state, utility, and local jurisdictions’ financial incentives – such as tax breaks, rebates, and component swaps – are available to many homeowners around the U.S.

1. Find better ways to heat and cool your house.

As much as half of the energy used in homes is spent on heating and cooling. The following are a few ways that energy bills can be reduced through adjustments to the heating and cooling systems:

Install a ceiling fan. Ceiling fans can be used as an alternative to air conditioners, which require significantly less amount of energy.

Periodically replace air filters.

Set thermostats to an appropriate temperature. They should be turned down at night and when no one is home. In most homes, approximately 2% of the heating bill can be saved for each degree the thermostat is lowered for at least eight hours each day. Lowering the thermostat from 75°F to 70°F, for example, saves approximately 10% on heating costs.

Install a programmable thermostat. A programmable thermostat saves money by allowing heating and cooling appliances to be automatically adjusted during times when no one is home and at night. Programmable thermostats contain no mercury and, in some climate zones, can save up to $150 per year in energy costs.

Install a wood stove or a pellet stove. These are more efficient sources of heat than furnaces.

At night, draw curtains over windows to better insulate the room.

2. Install a tankless water heater.

Demand-type water heaters (tankless or instantaneous) provide hot water only as it is needed. They don't produce the standby energy losses associated with traditional storage water heaters, which will save on energy costs. Tankless water heaters heat water directly, eliminating the need for a storage tank. When a hot water tap is turned on, cold water travels through a pipe into the unit. A gas burner or an electric element heats the water. As a result, demand water heaters deliver a constant supply of hot water. You don't need to wait for a storage tank to fill up with enough hot water.

3. Replace incandescent light bulbs.

The average household dedicates 11% of its energy budget to lighting. Traditional incandescent light bulbs convert only about 10% of the energy they consume into light, while the rest is converted into heat. The use of new lighting technologies, such as light-emitting diodes (LEDs) and compact fluorescent lamps (CFLs), can reduce the energy use required by lighting by 50% to 75%. Advances in lighting controls offer further energy savings by reducing the time lights are on but not in use.

Here are some facts about CFLs and LEDs:

CFLs use 75% less energy and last about 10 times longer than traditional incandescent bulbs.

LEDs last even longer than CFLs and consume less energy.

LEDs have no moving parts and, unlike CFLs, they contain no mercury.

4. Seal and insulate your home.

Sealing and insulating your home is one of the most cost-effective ways to make a home more comfortable and energy-efficient, and you can do it yourself. A tightly sealed home can enhance comfort, improve indoor air quality, and lower utility bills. An InterNACHI® energy auditor can assess leakage in the building envelope and recommend fixes that will dramatically increase comfort and energy savings.

The following are some common places where leakage may occur:

electrical receptacles/outlets;

mail slots;

around pipes and wires;

wall- or window-mounted air conditioners;

attic hatches;

fireplace dampers;

Inadequate weatherstripping around doors.

baseboards;

window frames; and

switch plates.

Because hot air rises, air leaks are most likely to occur in the attic. Homeowners can perform a variety of repairs and maintenance to their attics that save them money on cooling and heating, such as:

Plug the large holes. Locations in the attic where leakage is most likely to be the greatest are where walls meet the attic floor, behind and under attic knee walls, and in dropped-ceiling areas.

Seal the small holes. You can easily identify these areas by looking for spots where the insulation has darkened. Darkened insulation is a result of dusty interior air being filtered by insulation before leaking through small holes in the building envelope. In cold weather, you may notice frosty areas in the insulation due to warm, moist air condensing and then freezing as it encounters the cold attic air. In warmer weather, you’ll find water staining in these same areas. Use expanding foam or caulk to seal the openings around plumbing vent pipes and electrical wires. Cover the areas with insulation after the caulk is dry.

Seal up the attic access panel with weatherstripping. You can cut a piece of fiberglass or rigid foamboard insulation to the same size as the attic hatch and glue it to the back of the attic access panel. If you have pull-down attic stairs or an attic door, these should be sealed in a similar manner.

5. Install efficient showerheads and toilets.

The following systems can be installed to conserve water usage in your home:

Low-flow showerheads. They are available in different flow rates, and some have a pause button which shuts off the water while the bather lathers up;

Low-flow toilets. Toilets consume 30% to 40% of the total water used in homes, making them the biggest water users. Replacing an older 3.5-gallon toilet with a modern, low-flow 1.6-gallon toilet can reduce usage by an average of 2 gallons per flush (GPF), saving approximately 12,000 gallons of water per year. Low-flow toilets usually have "1.6 GPF" marked on the bowl behind the seat or inside the tank;

vacuum-assist toilets. This type of toilet has a vacuum chamber that uses a siphon action to suck air from the trap beneath the bowl, allowing it to quickly fill with water to clear waste. Vacuum-assist toilets are relatively quiet; and

dual-flush toilets. Dual-flush toilets have been used in Europe and Australia for years and are now gaining in popularity in the U.S. Dual-flush toilets let you choose between a 1-gallon (or less) flush for liquid waste, and a 1.6-gallon flush for solid waste. Dual-flush 1.6-GPF toilets reduce water consumption by an additional 30%.

6. Use appliances and electronics responsibly.

Appliances and electronics account for approximately 20% of a typical U.S. home's household energy bills. The following are tips that will reduce the required energy of electronics and appliances:

The refrigerators or freezers should not be located near the stove, dishwasher, or heat vents, or exposed to direct sunlight. Exposure to warm areas will force them to use more energy to remain cool.

Computers should be shut off when not in use. If unattended computers must be left on, their monitors should be shut off. According to some studies, computers account for approximately 3% of the United States' total energy consumption.

Use efficient ENERGY STAR-rated appliances and electronics. These devices, approved by the U.S. Department of Energy and the Environmental Protection Agency’s ENERGY STAR Program, include TVs, home theater systems, DVD players, CD players, receivers, speakers, and other audio equipment. According to the EPA, if just 10% of homes used energy-efficient appliances, it would reduce carbon emissions by the equivalent of 1.7 million acres of trees.

Chargers, such as those used for laptops and cell phones, consume energy when they are plugged in. When they are not connected to electronics, chargers should be unplugged.

Laptop computers consume considerably less electricity than desktop computers.

7. Install daylighting as an alternative to electrical lighting.

Daylighting is a method of bringing natural light from outside to illuminate a home's interior. It can be achieved using the following approaches:

skylights. They must be double-pane; otherwise, they may not be cost-effective. Flashing skylights correctly is key to avoiding leaks.

light shelves. Light shelves are passive devices designed to bounce light deep into a building. They may be interior or exterior. Light shelves can introduce light into a space up to 2½ times the distance from the floor to the top of the window, and advanced light shelves may introduce four times that amount.

clerestory windows.  Clerestory windows are short, wide windows set high on the wall. Protected from the summer sun by the roof overhang, they allow winter sun to shine through for natural lighting and warmth.

light tubes.  Light tubes utilize a special lens designed to amplify low-level light and reduce the intensity of light from the midday sun. Sunlight is channeled through a tube coated with a highly reflective material, and then enters the living space through a diffuser designed to distribute light evenly.

8. Insulate windows and doors.

About one-third of the home's total heat loss usually occurs through windows and doors. The following are ways to reduce energy lost through windows and doors:

Seal all window edges and cracks with rope caulk. This is the most cost-effective and straightforward option.

Windows can be weatherstripped with a special lining that is inserted between the window and the frame. For doors, apply weatherstripping around the whole perimeter to ensure a tight seal when they're closed. Install quality door sweeps on the bottom of the doors, if they aren't already in place.

Install storm windows at windows with only single panes. A removable glass frame can be installed over an existing window.

If existing windows have rotted or damaged wood, cracked glass, missing putty, poorly fitting sashes, or locks that don't work, they should be repaired or replaced.

9. Cook smart.

A significant amount of energy is wasted during cooking. The following recommendations and statistics illustrate less wasteful ways of cooking:

Convection ovens are more efficient than conventional ovens. They use fans to circulate hot air more evenly, allowing food to be cooked at a lower temperature. Convection ovens use approximately 20% less electricity than conventional ovens.

Microwave ovens consume approximately 80% less energy than conventional ovens.

Pans should be placed on matching-size heating elements or flames.

Using lids on pots and pans will heat food more quickly than cooking in uncovered pots and pans.

Pressure cookers dramatically reduce cooking time.

If you have a conventional oven, place food on the top rack, which will get hotter and will cook the food faster.

10. Change the way you do laundry.

It's more efficient to do full loads of washing than medium loads.

Avoid using high-temperature settings when clothes are not very soiled. Water at 140° F uses far more energy than water at 103° F for the warm-water setting; however, 140° F isn’t significantly more effective for cleaning clothes.

Clean the lint trap every time before you use the dryer. Not only is excess lint a fire hazard, but it also prolongs the time required for your clothes to dry.

If possible, air-dry your clothes on lines and racks.

Spin-dry or wring out clothes before putting them in the dryer.

Homeowners who take the initiative to make these changes usually discover that the energy savings are more than worth the effort. InterNACHI® home inspectors can make this process much easier because they can perform a more comprehensive assessment of energy-savings potential than the average homeowner can.   Find an InterNACHI Home Energy Inspector in your neighborhood.

Buying, selling or have a question about your home?